Line Guard
A line guard is intended for the protection against arc over and abrasion and gives limited repairing. The protection degree required on a specified line is depending on different factors like temperature, line design, tension, vibration history, and exposure on a similar construction in a similar location. Line guards are suggested as minimum protection for several hand-tied spans.
The single and double support lengths appear as S and D on the length column. There is also a rod diameter which supports in arriving at the applied overall equipment diameter. The rods per set indicate the actual number of rods for each application. There is also a center mark that establishes the recommended rod alignment during the application.
The line guard is intended to provide protection against arc over and abrasion while also offering limited repair. The protection degree required on a specified line is depending on the factors like line design, exposure to wind flow, tension, and history of vibration on similar construction.
Features
- It is color-coded for making it easy to be identified
- Restoration for full strength when it is less than 50 percent of the broken outer strands
- Special ends for the application running on high voltage
| Catalog | Diameter Range (Inches) | Length | Rod Diameter | Rods Per | Color | |
| Number | Min. | Max. | (Inches) | (Inches) | Set | Code |
| LG-7 | 0.182 | 0.193 | 17(S) | 0.102 | 7 | Purple |
| LG-8 | 0.26 | 0.273 | 19(S) | 0.121 | 8 | Green |
| LG-9 | 0.309 | 0.326 | 21(S) | 0.121 | 9 | Red |
| LG-10 | 0.347 | 0.366 | 23(S) | 0.121 | 10 | Green |
| LG-11 | 0.39 | 0.413 | 25(S) | 0.121 | 11 | Yellow |
| LG-12 | 0.414 | 0.436 | 25(S) | 0.121 | 12 | Brown |
| LG-13 | 0.464 | 0.49 | 27(S) | 0.121 | 13 | Green |
| LG-14 | 0.522 | 0.551 | 29(S) | 0.121 | 14 | Black |
| LG-15 | 0.552 | 0.585 | 31(S) | 0.121 | 15 | Red |
| LG-16 | 0.704 | 0.74 | 37(S) | 0.146 | 16 | Green |
| LG-17 | 0.741 | 0.792 | 39(S) | 0.146 | 17 | Orange |
| LG-18 | 0.793 | 0.84 | 39(S) | 0.146 | 18 | Purple |
| LG-19 | 0.841 | 0.898 | 41(S) | 0.146 | 19 | Blue |
Frequently Asked Questions (FAQ)
What is a line guard?
A line guard is used for protecting against arc over and protecting against abrasion. It gives limited repair as well. The protection degree needed on a specific line depends on elements such as line design, temperature, vibration history, tension, and exposure to similar construction in the area. It is suggested as the minimal protection against hand-tied span.
What is the application of the product?
The line guard is directed towards providing real protection against arc over and abrasion. It also gives limited repair. The protection degree needed on a specific line is depending on elements like line designing, exposure to wind flow, tension, and history of the vibration on similar construction.
What are the components of the product?
The double and single support length appear as S and D on the length columns. There is also present a rod diameter that aids in arriving at the applied overall tool diameter. The rods per set visualize the actual number of rods for every application. There is a center mark establishing the recommended rod alignment in the application.
What are the features of the product?
- Color coding for identification ease
- Full strength restoring when less than half of the broken outer strands
- Special ends for the high volt application